# How far can you run 200 amp service underground?

## How far can you run 200 amp service underground?

You’ll see that if you’re using 2/0 wire for 200A you’re almost certainly using copper, not aluminum. On 2020-07-02 by BILLY M. The distance is roughly 150 feet.

## What size wire do I need to run 200 amp Service 200 feet?

For 125 amps, you will need a 1-gauge copper wire. For 150 amp, you will need a 1/0-size copper wire. For a 200 amp service, you will need a 250 kcmil-gauge copper wire. For a 400 amp service, you will need a 600 kcmil-gauge copper wire.

## How big of an alternator do I need for 2000 watts?

For example, if you installed a 2,000-watt amp, assuming a nominal voltage of 13.5V, you’d add roughly 150 amps of demand to the electrical system.20 Aug 2021

0.5067 mm²

## What size wire do I need for 1000 watts?

If your amp is capable of 1000 watts RMS then it requires 4 gauge wire.12 Nov 2011

## What size wire do I need for a 2000 amp service?

Re: Wire size for 2000 Amp Here is Methy’s 0000 awg wire.19 Mar 2010

85 amps

## What kcmil 250?

For example, one common wire size used in the NEC has a cross-section of 250,000 circular mils, written as 250 kcmil or 250 MCM, which is the first size larger than 0000 AWG used within the NEC. 1000 circular mil equals 0.5067 mm2, so for many purposes, a ratio of 2 MCM ≈ 1 mm2 can be used with negligible (1.3%) error.

## What is 2000 Kcmil used for?

2000 MCM / 2000 KCMIL 600-volt Copper THHN THWN-2 is used as a building wire for commercial and industrial applications.20 Feb 2017

## What is bigger 4 0 or 250 Kcmil?

Kcmil sizes are used instead of AWG for sizes larger than 4/0 AWG. The smallest standard size is 250 kcmil, the largest 2000 kcmil. The sizes follow no obvious logic.

## What size wire do I need for 2000 watt amp?

Depending on how far you’re going, you’ll need between 4 gauge wire to00 gauge wire for a 2000 watt amplifier. If you only go 0-4 feet you can get away with the smaller wire, but anything beyond that will need thicker wire. It is possible to use 2 gauge for up to 10 feet.

## Is 4 gauge wire enough for 1000 watts?

Any reasonably powerful system would do fine with 4 gauge wire. 4 gauge wire easily support 1000+ watts.4 Jan 2010

## How is Kcmil calculated?

The n gauge wire’s cross sectional area An in kilo-circular mils (kcmil) is equal to 1000 times the square wire diameter d in inches (in). The n gauge wire’s cross sectional area An in square inches (in2) is equal to pi divided by 4 times the square wire diameter d in inches (in).

## What does 500 MCM stand for?

MCM is an abbreviation for thousands of circular mils, an old measurement of wire gauge. 1 MCM = 1 kcmil = 0.5067 square milimeters. A mil is 1/1000 inch. A wire 200 mils in diameter is 40 MCM.

## How many batteries do I need for a 3000 watt amp?

For a 3000-watt inverter, the number of batteries you need depends on their amperes per hour. For example, the average car battery has a 50Ah rating. If the battery banks you want to purchase are also 50Ah, you will need six of them for a 3000-watt inverter.12 May 2021

#### Used Resourses:

Author: superwhat